Series of Yi Sika IQ -- milling cutter of double-faced helix blade (H606)

The H606 that Yi Sika rolls out is double-faced mill razor blade, take 6 point to enclothe the R6mm circular arc inside limits of 90 ° included angle, circular arc radius is 6mm, can realize slope to visit mill, use at copying. H606 knife reel is held at the diameter 50, 63, on the face milling cutter of 80mm, this milling cutter can undertake slope visits mill be reachinged up is down, it is the outstanding solution of profile modeling milling, also can use at face milling and square shoulder milling. The main characteristic of bit is: H606 RXCU 1206... bit is not the circle on firm sense, however the circular arc of R6mm, can realize the function of D12mm standard round razor blade, can obtain more economic solution; Exceed big before horn, can reduce machine tool power to use up; Use swallow end razor blade to locate groovy clip is held, can reduce the cutting stress that action nails at snail. H606 RXCU 1206... the bit that takes AXT to break bits chamfer applies to treatment steel to reach cast-iron; The bit that takes AXMP to break bits chamfer applies to treatment austenite stainless steel and high temperature alloy. Common standard 12mm round razor blade offers 3 × blade of cutting of 90 ° circular arc, and HELIDO H606 double-edged razor blade offers 6 × blade of cutting of 90 ° circular arc, double-faced point all can realize slope to visit mill. CNC Milling